His position is easily accessible and can set their own. No need special keys, provide only 14 mm keys. The first process is a plastic lid that serves as protector nut. Use hand because the cover plastic cap nut only as protective suits that are not the torque.
Next, use the 14 mm keys to adjust the height position of the clutch lever as needed. Logically, if the nut rotated clockwise which means tightening, the clutch lever that will come ketarik pedal position is low.
Conversely, if the nut is playing against the counter-clockwise which is identical to relax, clutch lever, which means going back to the clutch pedal raised. Make sure when making adjustments coupled with the simulation in the cabin to get a suit that really wants.
In this process could be setup and testing the clutch pedal repeatedly done since the suit did not directly receive appropriate. Please note also, do not set too high in the clutch because it can cause the clutch plate attached to the flywheel. Conversely, setting too low will make it difficult when in gear despite already trodden the pedals until fixed.
After the most ideal settings in the can, return the plastic cover back into place to lock the adjustment nut so as not to spin. If you need buttons to lock reinforced plastic cable ties to ensure the nut does not move and cause the suit to change
No comments:
Post a Comment